ProDry & Air Enhancer Inject, All Sizes
AC Boosters & Acid Eliminators, Injects
SDS
Prodry & Air Enhancer Direct Inject SDS (165 KB, PDF)
-
This two-in-one inject hose combines Enviro-Safe’s Prodry XL4 and Air Enhancer into a one-step application that boosts your system while removing moisture and preventing A/C “cancer.” It also acts as preventative care to stop acid formation that will reduce your system’s performance and lifespan.
-
Multiple sizes available to chose from!
-
One-time use
-
Concentrate
-
No need to pump down R410 or other units
-
No injection hose or caulk gun needed
-
Concentrated formula means less material in the system
-
DO NOT use in ammonia systems
Step 1: Turn the A/C system on and verify the unit is running. Connect Air Enhancer with Prodry XL4 Inject to the lowside service port of the system. (This is generally the large line.)
Step 2: Connect the manifold refrigerant hose to the refrigerant supply tank. Verify the high and low side valves on the manifold are closed before proceeding. Purge the low-pressure hose when connecting to the ES Proseal XL4 Inject.
Step 3: Open the low-side valve and watch for the tube to clear. (This will ONLY take a few seconds!) Turn off low side manifold valve as soon as the tube is clear. Turn off refrigerant gas. Verify the system is charged to manufacturer’s specifications! Disconnect low side hose from ES ProSeal XL4 Inject. Install service port cap. Run the A/C unit at least one hour after installing ES ProSeal XL4 Inject.
Customers Also Bought:
Enviro-Safe Industrial R134a Replacement 8 oz cans & cases
Each can is equivalent to 21 ounces of 134a!
Enviro-Safe R134a Replacement Refrigerant W/ Dye 6 oz Cans & Cases #1030
For automotive and other R134a applications. Equivalent to 16 oz of R134
Pittstop R134A Oil Checker, 2 Pack or 10 Pack
Easy to use for detection of A/C oil levels and harmful acids in the A/C system.
Domestic Store - 