Lever Tube Expander #3405
- Comes with reamer and tube cutter and molded case
- Has 7 expander heads sized 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1 1/8", O.D
- Has long handles for comforable leverage to easily expand 3/8" to 1 1/8" O.D.
- Has nine expander heads to attach to the front of the handle
- Allows you to re-round deformed tube and fitting ends
- Helps to salvage shorts and scraps to make couplings
- Precise swaging
- Using precise swages instead of couplings saves 100% of couplings, 50% of solder points, 50% of soldering metal, 50% of time as well as possible leaks.
- Tube cutter also has a deburring attachment. Replacement cutter wheels are available at part #3430a
- For use with soft copper a/c line only. Preheat lines before expanding
Using this tool will eliminate the need of couplers for joining copper tubing. Simply install proper expander head into copper tubing, expand tubing to proper size, slip tubing into expanded tubing and solder together.
The reamer and deburring tool is used for brass and copper. Simple insert cut tubing into reamer and turn. The burr is gone. This tool works on the inside or outside of tubing to remove burrs.
Customers Also Bought:
Enviro-Safe Industrial R134A Replacement 30lb & 50lb Cylinders
Remember 12 lbs of Enviro-Safe Industrial equals 31.2lbs of R134a!! Use less refrigerant, get lower high side pressure, colder temps and use less horsepower to get the colder air!
*Haz/Mat fee not included.
Domestic Store - 