Oil Charge for R1234YF Systems Can/Case
Oil Charge SDS (1970 KB, PDF)
- The top of the can has a R134a top which means it is a right handed top so you need to make sure you have the correct hose.
- A blend of selected oils that have been formulated to provide the extra oil needed when an air conditioning unit loses the oil charge due to leaks or malfunctions in the system.
- For use in 1234YF systems
- Use only with mineral, ester or pag oils.
- Check to see if you need more oil in your system - oil checkers available on our website. They are part #: 5025a and 5030a.
- DO NOT use in ammonia systems
- DO NOT use in CO2 systems
- Cannot be sent to Alaska or Hawaii or exported to foreign countries except in pallet quantities
- Gas propelled
- Installs the same way as refrigerant
- Cannot be added to a fully charged system
Directions for Use:
Read and understand all warnings and directions before use. As per use with any ﬂammable substance, take adequate precautions during use.
1. Shake can well.
2. Install can tap valve and charging hose.
3. Install charging hose on low pressure side ONLY
4. Invert can.
5. Turn on compressor.
6. Open charging valve on low pressure side.
7. Install desired amount of oil into system.
8. Discard empty can according to all rules and regulations for disposal in your area.
Customers Also Bought:
Enviro-Safe Dye Charge for R1234YF is fully is specifically designed to assist you in locating air conditioning leaks that may occur in your 1234YF system.
Finally oil checkers for 1234yf systems!!