NOTE: You must have cookies enabled before purchasing products online.
Please enable cookies in your browser settings and refresh this page.

Enviro-Safe Dye Inject 2050AI-15T

Leak Finder, Injects, Leak Finder, Leak Finder

This item is not currently available for online purchasing. Please check back soon. Contact us to purchase by phone.

Envirosafe Enviro-Safe Dye Inject 2050AI-15T Photo - Click to Enlarge


 Enviro-Safe Dye Inject SDS (158 KB, PDF)

Enviro-Safe Dye Inject is the very first Dye in a direct inject product. Enviro-Safe's very own Dye Inject is now available to purchase in the same DIRECT INJECT system as Enviro-Safe ProSeal XL4 Inject

Features and Benefits:Pro

  • Dye Inject is the concentrated version of Enviro-Safe Dye VS.
  • Treats systems from 6-15 Tons
  • Easy to install

Dye is fully compatible with mineral-pag-ester oils and is specifically designed to assist you in locating air conditioning leaks that may occur in your air conditioning system.

A precisely selected color highly concentrated dye (fluorescent yellow) is utilized and allows the dye to be highly visible. In most cases, the dye may be seen with the naked eye.  However, the use of a blacklight as well as UV glasses does make it much more visible. (blacklight and UV glasses available for purchase on our website) #3530

This dye is the same color as the dye that auto makers currently use in automobile A/C systems.

Step 1: Turn the a/c system on, and verify the unit is running. Connect Dye Inject to the low-side service port of the system (This is generally the large line).

Step 2: Connect the manifold refrigerant hose to the refrigerant supply tank. Verify the high & low side valves on the manifold are closed before proceeding. Purge the air from the low side. 

Step 3: Open low side valve; watch for the tube to clear (This will ONLY take a few seconds!) Turn off low side manifold valve as soon as the tube is clear.  Turn off refrigerant gas. Verify the system is charged to manufacturer’s specifications. 
Disconnect low-side hose from Dye Inject. Install service port cap. 

Note: Do Not use – Enviro-Safe Dye Inject in any manner it was not designed! Read and understand the product’s label and Safety Data Sheet. The (SDS) for precautionary and first aid information is available under the tab documents. 

Newsletter Signup: