NOTE: You must have cookies enabled before purchasing products online.
Please enable cookies in your browser settings and refresh this page.



5/32" Speedy Weld Rod #5810

Torch & Weld Rod

$15.00 Quantity:

Envirosafe 5/32" Speedy Weld Rod #5810 Photo - Click to Enlarge

Speedy Weld Rod is different from other weld rods that you have purchased in the past. There is no need to throw away partially used rods because they have ceased to produce a weld ark. Simply pick the rod up and use the entire rod, thus resulting in savings.

Speedy Weld Rod is also a moisture resistant welding rod. There is no need to store these welding rods in the oven or refrigerator in an attempt to keep them moisture free. Speedy can be left out on or in your work bench for hours, days or weeks with no worry of loss of use resulting from moisture.


Welding has never been easier - the results are smooth running weld beads in no time!

Most welding rods only work when the material to be welded is clean, unpainted, grease and dirt free, and free of other contaminates.  Worry no longer - this rod will weld through the nasty stuff - animal waste.  There is no need to clean the metal completely to get a nice weld bead.  This rod welds galvanized metal, thin metal, you can even weld overhead with much less spatter than regular weld rods.  The slag brushes off without the use of a slaghammer.  We do not recommend leaving the weld rods out in the snow or rain, but if you do it is not going to have any negligible effects on this rod!


Available in Three Sizes:

1/8", 3/32" and 5/32"

Technical Information:

Speedy weld rod produces less fumes and gases than regular rods.  Speedy Weld rod has a high tensile strength of 90,000 psi.  It can be used on any power source  or AC - DC welder.  Speedy weld rod can use both gap or drag technique.  Speedy weld rod has an elongation of 24%.

 

​Technical Data:

  • ​Tensile Strength..................................up to 80,000 psi
  • ​Yield Strength.....................................up to 68,000 psi
  • ​Elongation %.......................................approx. 24
  • ​Current................................................ AC or DC either polarity

Remove as much foreign material as practical from the weld area. DC reverse polarity (electrode +) produces deep penetration; DC straight polarity (electrode -) will have limited penetration and a flatter bead. AC prevents arc blow. A medium arc length should be maintained with either stringer or weave beads. Slag is easily removed with a light chipping hammer.

Customers Also Bought:

R12 R22 R502 Brass 1/4" Service Port Caps Hex Head 10 Pack #3407 - Click to Purchase

R12 R22 R502 Brass 1/4" Service Port Caps Hex Head 10 Pack #3407

For more information on this product, click the product title above.

$9.00 Quantity:

Air Enhancer 4oz Can #2000A - Click to Purchase

Air Enhancer 4oz Can #2000A

Enviro-Safe Air Enhancer is an air conditioning performance booster specially formulated treatment designed to enhance cooling properties of new and old air conditioning and refrigeration systems. For more information on this product, click the product title above

$7.00 Quantity:

Newsletter Signup: