NOTE: You must have cookies enabled before purchasing products online.
Please enable cookies in your browser settings and refresh this page.



Enviro-Safe Industrial R134a Replacement Kit with Stop Leak #1040

134a Replacement

$43.95 Quantity:

Envirosafe Enviro-Safe Industrial R134a Replacement Kit with Stop Leak #1040 Photo - Click to Enlarge

 

  • Kits includes:
    • ​4 cans Enviro-Safe Industrial R134a Replacement Refrigerant 6 oz 
    • 1 can Enviro-Safe Stop Leak 4 oz
    • 1 each 134a brass charging hose and coupler with gauge
    • 1 each dial thermometer
    • 2 each system tags
  • Each can of Enviro-Safe Industrial R134a Replacement Refrigerant is equal to 1 lb of R134a. That means you have a total of 4 lbs equivalent refrigerant.
  • The can of Enviro-Safe Stop Leak will relubricate and seal leaks in the o rings and seals.
  • The charging hose with gauge allows you to connect the can on one end to the service port on your vehicle on the LOW SIDE.
  • This charging hose connects to the old 134a cans.
  • The dial thermometer is used to check the temperature coming out the center vent of the vehicle.

Flammable to an open flame or spark, proceed with caution if used in systems designed for non-flammable refrigerants.

 

Please refer to the manufacturer's specification prior to recharging the a/c system for proper pressures.

  1. Use Stop Leak first making sure that the compressor is functioning correctly and the a/c unit is turned on.
  2. Follow the directions on the side of the can.
  3. After installing the Stop Leak, immediately install refrigerant to proper manufacturer's pressures.
  4. Do NOT overcharge!
  5. Do NOT exceed 60 psi on low pressure port. The low pressure port is generally the larger diameter line from compressor.

Flammable to an open flame or spark, proceed with caution if used in systems designed for non-flammable refrigerants.

Do not SMOKE or use spark, or flame when using any refrigerant, refrigerant support product, or flammable products, when servicing air conditioning equipment.

The Temperature Pressure Chart is specific to the temperature of refrigerant when inside of the a/c system. These PSIG pressures are not the operating pressure. The Temperature Pressure Chart displays the readings to charge on manifold gauge to your a/c systems to refrigerant. 

 

Customers Also Bought:

High-Low Adapter Set #3000 - Click to Purchase

High-Low Adapter Set #3000

#3000 Contains 1 high side adapter and 1 low side adapter. This kit makes converting a no-brainer! Blue cap is lowside -- low side on most vehicles is larger line. Red Cap is highside For more information on this product, click the product title above.

$3.50 Quantity:

Related FAQS

Newsletter Signup: