Arctic Air Plus Can/Case
Arctic Air Plus SDS (2080 KB, PDF)
- This product is a combination of 3 Enviro-Safe products (ProDry, Air Enhancer, and Stop Leak) into 1 for maximum cooling performance. The ProDry will remove moisture in the A/C system. Moisture can cause corrosion in the A/C system or the A/C to freeze up.
- The Air Enhancer will reduce friction in system and provide colder air duct temps in most cases.
- The Stop Leak will recondition the rubber orings and seals.
- Compatible with any automotive refrigerant except ammonia and CO2
- Drying agent
- Colder air
- Longer life
- A/C Booster
- O-Ring/Seal Conditioner to recondition leaking seals
- DO NOT use in ammonia systems
- DO NOT use in CO2 systems
- Gas propelled
- Installs the same way as refrigerant
- Cannot be added to a fully charged system
Directions for Use:
Read and understand all warnings and directions before use. As per use with any ﬂammable substance, take adequate precautions during use.
1. Shake can well.
2. Install can tap valve and charging hose.
3. Install charging hose on low pressure side ONLY.
4. Invert can.
5. Install all product from can.
6. Operate system for thirty (30) minutes with air conditioning system operating at normal temperature.
7. Discard empty can according to all rules and regulations for disposal in your area.
Note: If an air conditioning system charged with Enviro-Safe develops a leak, it is recommended to evacuate any refrigerant before adding any dye charge, oil charge, or before installation of any refrigerant.
Customers Also Bought:
Remember 6 oz of Enviro-Safe Industrial equals 16 oz of R134a!! Use less refrigerant, get lower high side pressure, colder temps and use less horsepower to get the colder air!
For more information please click the link above.
An easy to use item for detection of A/C oil levels and harmful acids in the oil A/C system.